Table of Contents
Tree stumps are ugly and quite dangerous for an individual’s property. That’s why it is very important to remove them and a stump grinder is one of the best tools that can help you out. So, if you are also having a stump in your yard and want to remove it with the help of a stump grinder, just go through this article. Here you will get valuable tips and steps that will help you in using a stump grinder more efficiently.
Things To Keep in Mind Before Getting Started With a Stump Grinder
Before starting your grinder, always make sure to follow these things:
Clear The area around The Stump
Before you start grinding the stump, look at the area around the stump. If you notice any debris or rock, just clean it immediately because it can damage and weaken the blade of the grinder.
Trim The Stump
You must cut the stump close to the ground before starting grinding. It will make your task easier.
Put Up all Your Saftey Guards
Before getting started with the stump grinding, be assured that you are wearing all your essential safety guards such as gloves, earplugs, boots, and goggles. Never forget to use the safety guards otherwise, you may get injured.
Lookout For The People and animals Nearby You
When the grinder is not in use, always remember to turn it off. Always use the grinder while holding it from the panel, it will keep you safe.
Always Be On alert While Using the Stump Grinder
5 Easiest Steps To Grind a Stump
Here are the 5 simple steps that can make your job easier.
Step 1: Prepare The Area Where you Will Grind
Before starting your machine, you should first remove all the debris and rocks which are around the stump. Now, with the help of a chainsaw, cut the stump as close to the ground as you can. Don’t allow people and pets to come into the working area. Blocking the area could be the better option.
Step 2: Bring The Machine Into the Position
When you are done with preparing the area, bring the grinder to the position. Make sure that the position is right and comfortable for you. Also, there is a possibility that you will have to change the angle and height many times while grinding. So, try to avoid changing the handle’s position when the machine is on. You can use the locks on the wheel if you find it needed.
Step 3: Grind a Part Of The Stump
Always keep in mind that if you want more efficiency then you must reposition the grinder. It will help in changing the angle whenever you drop-down around 80 to 100 millimeters on the stump. It will assist you in getting done with the work very fast.
Step 4: Now Reposition The Grinder
So, when you notice that the stump is reduced to the ground level, shift the machine towards the trunk’s center and lock the wheels in place. Position the handle at an appropriate place and keep grinding until you notice completely clean space.
Step 5: Take Some Soil To Cover the Area
Turn off the ignition and be assured that the stump grinder is completely turned off. Now bring the fresh soil and wood chips to fill up the hole, it will help to avoid any type of safety problems.
Always remember to use the right technique. Don’t force the stump grinder into the hardwood because it can weaken the blade. Instead of doing this, you should let the blade skim across the stump’s top to gently grind it down.
What To Do With The Wood Chip Which Is Left
Here are the few things that you can do with the leftover wood chip:
- You can use the wood chip to fill the hole after getting done with stumping.
- Using it for compost can also be a good fit.
- If you are not having any use of it, you can ask the local nurseries or your neighbors if they want them.
More Articles That Might Interest You: